Konica Minolta bizhub C658 Service Manual page 284

bizhub C658/C558/C458/C368/C308/C258
(2) Procedure
[1]
20.1.7 Replacing the upper paddle (FS-537SD)
(1) Periodically replacing parts/cycle
• Upper paddle: Every 2,000,000 counts
(2) Procedure
1. Remove the saddle unit.
Saddle unit (FS-537SD saddle section)
2. Remove the front cover.
G.8.20.1 Front cover (FS-537SD saddle section)
[4] [5] [3] [2] [5]
[5] [1] [5]
[2]
[1]
[1]
F PERIODICAL MAINTENANCE > 20. Periodical maintenance procedure FS-537/
1. Using a cleaning pad dampened with alcohol, wipe the paddle [1].
3. Disconnect two connectors [1].
[6]
4. Remove the E-ring [2].
5. Remove the gear [3] and the belt [4].
6. Remove four screws [5] and remove the center fold guide motor assy [6].
7. NOTE
8. Remove the upper paddle assy [1].
▪ When reinstalling the belt, align the portions of the gear [1] and the
gear [2] indicated in the illustration with the triangular marking on
the metal plate. Then, install the belt.
F-96
FS-537SD