Konica Minolta bizhub C658 Service Manual page 531

bizhub C658/C558/C458/C368/C308/C258
[1]
[1] [1]
8. To reinstall, reverse the order of removal.
8.4.20 Stamp unit (SP-501)
[1]
[1]
[1]
[2]
[2]
[2]
6. Remove one screw [1]. Then, remove the wire saddle [2] from the CIS cable.
7. Remove the CIS cable.
NOTE
▪ If the CIS cable is to be replaced with a new one, remove the two wire
saddles [1] that are attached to the old CIS cable and attach them to
the new cable.
▪ Attach the wire saddles at the same positions as those at which they
were attached.
1. Peel off the mat (at two places on the left) [1].
2. Remove the two screws [1], and remove the cover [2].
3. Remove the screw [1].
4. Remove the harness and disconnect the connector [2].
G-231
G DISASSEMBLY/REASSEMBLY > 8. Option