Konica Minolta bizhub C658 Service Manual page 321

bizhub C658/C558/C458/C368/C308/C258
(1) Removal procedure
1. Remove the waste toner box.
F.7.6.1 Replacing the waste toner box
2. Remove the front lower cover.
G.5.2.14 Front lower cover
3. Remove the left cover.
G.5.2.16 Left cover
4. Remove the exit tray.
G.5.2.17 Exit tray
5. Remove the DC power supply.
G.5.4.3 DC power supply (DCPU)
6. Remove the PH relay board.
G.5.4.13 PH relay board (PHRYB)
[1]
[1]
[1]
[2]
[1]
[1]
[1] [2] [1]
G DISASSEMBLY/REASSEMBLY > 5. bizhub C368/C308/C258
7. Disconnect three connectors [1] on the front side board.
8. Disconnect two connectors [1].
9. Remove the harness from the wire saddle [1].
10. Remove the flat cable from the cable clamp [2].
11. Remove seven screws [1], and remove the metal plate [2].
G-21