Konica Minolta bizhub C658 Service Manual page 373

bizhub C658/C558/C458/C368/C308/C258
5. Remove the front cover.
G.5.2.15 Front cover
6. Remove the transport unit.
G.5.3.12 Transport unit
[1]
[2]
[2]
[1]
9. To reinstall, reverse the order of removal.
5.8.3 Gate switch solenoid (SD3)
1. Remove the fusing unit.
F.7.9.1 Replacing the fusing unit
2. Remove the control panel left cover/1.
G.5.2.6 Control panel left cover/1
3. Remove the control panel right cover.
G.5.2.8 Control panel right cover
4. Remove the control panel front cover.
G.5.2.10 Control panel front cover
5. Remove the scanner right cover.
G.5.2.2 Scanner right cover
6. Remove the upper right cover.
G.5.2.19 Upper right cover
7. Open the right door and the regist unit.
[1] [2]
[1] [3]
[2]
[1]
G DISASSEMBLY/REASSEMBLY > 5. bizhub C368/C308/C258
7. Remove the harness from two wire saddles [1], and disconnect the connector
[2].
8. Remove the screw [1], and remove the IDC sensor shutter solenoid [2].
8. Remove two screws [1] and the tab [2], and remove the cover [3].
9. Remove the screw [1], and remove the cover [2].
G-73