Konica Minolta bizhub C658 Service Manual page 813

bizhub C658/C558/C458/C368/C308/C258
Key name
HDD Encryption Setting
Debug Log Encryption
Settings
Function Management Usage Setting for Each
Settings Function
Maximum Job Allowance
Network Function Usage
Settings
(2) Administrator Settings > Security Settings [2/3]
NOTE
▪ Keys displayed on screens are different depending on the setting.
▪ For details of the utility functions, refer to ''User's Guide.''
Key name
Stamp Settings Apply Stamps
Delete Registered Stamp
Job Log Settings Job Log Usage Set.
Automatic Log Distr Set.
Image Log Transfer
Settings
Driver Password For details of the functions, refer to [
Encryption Setting
FIPS Settings -
Maintenance Mode Access To enable Maintenance Mode Access, set [Maintenance Mode] of Service Mode to [Effective].
[Service Mode] -> [System 2] ->
Quick Security Setting For details of the functions, refer to
Information Backup Setting Server Backup
Restore from Server
HDD Backup
User Box Document -
Backup
(3) Administrator Settings > Security Settings [3/3]
For details of the functions, refer to "
Setting."
• Use: To set a password used to encrypt debug data when storing it into the
• Default setting: 01234567890123456789
• For details of the functions, refer to "
It will be displayed when [Service Mode] -> [Billing Setting] ->
Choice] shows that vendor 2 or management device 2 is mounted.
When the vendor or management device setting in the Service Mode is set, this
setting is set to "OFF." Exercise caution since it will stay in "OFF" setting even when
"unset" is selected on vendor or management device setting in Service Mode later.
-
-
-
-
• This is displayed only when Switch No. "63" is set to [00000001] at Bit assignment/[01] at HEX assignment
(Type 1) or [00000010] at Bit assignment/[02] at HEX assignment (Type 2) in [Service Mode] -> [System 2] ->
[Software Switch Setting].
• For details of the functions, refer to [
• For details of the functions, refer to [
-
-
-
Function/Precondition
HDD.
Encryption Settings."
Function/Precondition
I.2.11.16 Security Settings - Image Log Transfer Settings
I.2.11.17 Security Settings - Image Log Transfer Settings
I.2.11.18 Security Settings - Driver Password Encryption
[Maintenance Mode]
Quick Security setting.
I-43
I ADJUSTMENT/SETTING > 2. List of utility mode
I.2.11.14 Security Settings - HDD Encryption
I.2.11.15 Security Settings - Debug Log
[Management Function
Setting.]
(Type1).]
(Type2).]