Konica Minolta bizhub C658 Service Manual page 648

bizhub C658/C558/C458/C368/C308/C258
[1]
[2] [1]
[3]
[1] [2]
[3] [4]
[2]
[3] [1]
15. To reinstall, reverse the order of removal.
8.16.20 Main tray up/down motor (M11) (FS-536/FS-536SD)
1. Remove the finisher from the main body.
G.8.16.6 Finisher (FS-536/FS-536SD)
2. Remove the rear cover.
G.8.16.1 Rear cover (FS-536/FS-536SD)
8. Disconnect the connector [1].
9. Remove seven screws [1], and remove the left upper cover [2].
10. Disconnect the connector [3].
11. Disconnect the connector [1], and remove the harness from the wire saddle [2].
12. Remove two screws [3], and remove the bundle eject motor assy [4].
13. Remove the rotating disk [1].
14. Remove two screws [2], and remove the bundle eject motor [3].
G-348
G DISASSEMBLY/REASSEMBLY > 8. Option