Konica Minolta bizhub C658 Service Manual page 303

bizhub C658/C558/C458/C368/C308/C258
2. Units from which removing is prohibited
2.1 CCD board
2.1.1 Reason for prohibition
• Since the accuracy of the CCD board is guaranteed as a unit, no accuracy is guaranteed if it is disassembled. Therefore, screws that lead
to the disassembly of the CCD board must not be removed.
2.2 PH unit
2.2.1 Reason for prohibition
• The laser runs inside the PH unit. Opening the cover may cause dust to enter and interrupt the laser. Do no remove any screw which may
disassemble the PH unit.
2.3 Fusing unit
2.3.1 Reason for prohibition
• Inner part of the fusing unit and the position of the fusing belt are adjusted prior to shipping. Do not remove any screw which may
disassemble the fusing unit.
G DISASSEMBLY/REASSEMBLY > 2. Units from which removing is prohibited
G-3