bizhub C658/C558/C458/C368/C308/C258
6. Check that the "Install OK" message appears.
5.14.7 Import/Export Settings
(1) WebDAV Setting
(a) Use
• To configure WebDAV server settings used to remotely export or import MFP data (address book data, authentication setting data).
(b) Procedure
<URL>
• To set the address of the WebDAV server.
<Folder Name>
• To set a folder name of the WebDAV server that is used to transfer data.
<Account>
• To set an account that is used to access the WebDAV server.
<Password>
• To set a password that is used to access the WebDAV server.
(2) Port Number
(a) Use
• To set a port number that is used to access the WebDAV server.
(b) Procedure
• Set the port number of the WebDAV server using the 10-key pad.
(3) SSL Settings
(a) Use
• To configure the WebDAV server's SSL settings.
(b) Default setting
• No
(c) Setting item
• Yes
• No
(4) Data Initialization
(a) Use
• To initialize the settings on the server.
(b) Default setting
• No
(c) Setting item
• Yes
• No
5.14.8 Auto Initial Dial Setting
(1) Use
• To set whether to configure the Auto Initial Dial Setting for each CSRC communication method.
• Execute the CSRC Auto Initial Dial automatically at the first time of startup after importing [Remote Access Settings] from [Machine
Import Setting].
NOTE
▪ This function is enabled only when "Set" is selected and the following conditions are satisfied.
• No registrations to the CSRC server have been made.
• At the first time that the main power is turned ON (reboot) after importing the CSRC server information under [Service
Mode] -> [Machine Update Settings] -> [Machine Auto Update Setting] -> [Machine Import Setting].
(2) Default setting
• Unset
(3) Setting item
• Set
• Unset
I ADJUSTMENT/SETTING > 5. SERVICE MODE
I-135