bizhub C658/C558/C458/C368/C308/C258
23. Periodical maintenance procedure PI-507
23.1 Paper feed section
23.1.1 Replacing the pick-up roller/Lw / feed roller/Lw (PI-507)
(1) Periodically replacing parts/cycle
• Pick-up roller/Lw: Every 200,000 counts
• Feed roller/Lw: Every 100,000 counts
(2) Procedure
1. Remove the upper cover.
G.8.24.1 Upper cover (PI-507)
[2]
[1]
[3]
[2]
[2]
[2]
[1]
[1]
[1]
[1]
F PERIODICAL MAINTENANCE > 23. Periodical maintenance procedure PI-507
2. Pull the unlock lever [1] and open the upper door [2].
3. Remove two C-clips [1], shift the two bushings [2] at left and right side, and
remove the feed roller assy/Lw [3].
4. Remove the bushing [1] and remove the actuator [2].
5. Remove two C-clips [1] and the two bushings [2].
F-103