Konica Minolta bizhub C658 Service Manual page 929

bizhub C658/C558/C458/C368/C308/C258
A: Standard voltage
5.16.21 Coverage Rate Screen
(1) Use
• To set whether or not to display a coverage rate on the sales counter screen and sales counter list.
• Coverage Counter instead of Coverage Rate is displayed when Switch No. 206 is set to [00000001] at Bit assignment/[01] at HEX
assignment in [Service Mode] -> [System 2] -> [Software Switch Setting].
(2) Default setting
• Do Not Display
(3) Setting item
• Display
• Do Not Display
5.16.22 JAM Code Display Setting
(1) Use
• To set whether or not to add a jam code to a jam warning display on the control panel when a jam occurs.
(2) Default setting
• Do Not Display
(3) Setting item
• Do Not Display
• Display
5.16.23 Purge Setting (bizhub C658/C558/C458)
(1) Use
• When a finisher equipped with a horizontal transport unit is mounted, set whether to use the reverse roller to discharge paper remained
in the machine when a paper jam occurs in the transport path downstream from the exit port (inside the finisher equipped with the
horizontal transport unit).
• When "Yes" is selected, paper remained in the machine when a paper jam occurs will be discharged into the horizontal transport unit.
(2) Default setting
• Yes
(3) Setting item
• Yes
• No
5.16.24 Import Config. Data
(1) BootUp Screen
NOTE
In the following conditions, import of BootUp Screen data is prohibited.
• [Administrator Settings] -> [Security Settings] ->
• [Administrator Settings] -> [Security Settings] -> [USB Connection Permission settings] -> [Detail Setting] -> [External Memory
(Service)] is set to [Restrict].
• [Administrator Settings] -> [Security Settings] ->
(a) Use
• To customize the BootUp Screen displayed upon machine start-up.
• Use this feature when changing the KonicaMinolta logo displayed on the control panel upon start-up to a client company logo or others
for client's intended use of the machine.
• Logo data can be registered to the eMMC board from USB memory.
• The following are the logo data specifications that should be met.
Image format
A +6
A +4
A +2
A 0
A -2
A -4
A -6
[USB Connection Permission
[Enhanced Security
PNG format
I-159
I ADJUSTMENT/SETTING > 5. SERVICE MODE
settings] is set to [Restrict].
Mode] is set to [ON].