Konica Minolta bizhub C658 Service Manual page 273

bizhub C658/C558/C458/C368/C308/C258
18. Periodical maintenance procedure FS-534/FS-534SD
NOTE
▪ The alcohol described in the cleaning procedure of maintenance represents the isopropyl alcohol.
18.1 Paper exit section
18.1.1 Cleaning procedure for each rollers/each rolls
(1) Periodically cleaning parts/cycle
• Each rollers/Each rolls: Every 300,000 counts
(2) Cleaning point
18.1.2 Cleaning the paddles
(1) Periodically cleaning parts/cycle
• Paddle: Every 300,000 counts
(2) Procedure
[1]
18.1.3 Replacing the paddle units
(1) Periodically replacing parts/cycle
• Paddle units: Every 2,000,000 counts
(2) Procedure
1. Remove the finisher from the main body.
G.8.14.6 Finisher (FS-534/FS-534SD)
2. Remove the front door of the finisher.
G.8.14.2 Front door (FS-534/FS-534SD)
3. Remove the front upper cover of the finisher.
G.8.14.3 Front upper cover (FS-534/FS-534SD)
4. Remove the rear cover of the finisher.
G.8.14.1 Rear cover (FS-534/FS-534SD)
[1]
F PERIODICAL MAINTENANCE > 18. Periodical maintenance procedure FS-534/
1. Using a cleaning pad dampened with alcohol, wipe the paddle [1].
5. Remove the paper exit tray [1].
F-85
FS-534SD