Konica Minolta bizhub C658 Service Manual page 356

bizhub C658/C558/C458/C368/C308/C258
5. Remove the drum unit/Y,M,C,K.
F.7.1.1 Replacing the drum unit
6. Remove the developing unit/Y,M,C,K.
F.7.2.1 Replacing the developing unit
7. Remove the left cover.
G.5.2.16 Left cover
8. Remove the exit tray.
G.5.2.17 Exit tray
9. Remove the sub hopper unit.
G.5.3.4 Sub hopper unit
[2]
[1]
11. To reinstall, reverse the order of removal.
5.5.7 Toner supply motor/C (M7)
1. Remove the lower rear cover.
G.5.2.20 Lower rear cover
2. Remove the scanner rear cover.
G.5.2.1 Scanner rear cover
3. Remove the upper rear cover.
G.5.2.22 Upper rear cover
[2] [1] [3]
5. To reinstall, reverse the order of removal.
5.5.8 Toner supply motor/M (M8)
1. Remove the lower rear cover.
G.5.2.20 Lower rear cover
2. Remove the scanner rear cover.
G.5.2.1 Scanner rear cover
3. Remove the upper rear cover.
G.5.2.22 Upper rear cover
[2] [3] [1]
5. To reinstall, reverse the order of removal.
5.5.9 Toner supply motor/Y (M9)
1. Remove the lower rear cover.
G.5.2.20 Lower rear cover
2. Remove the scanner rear cover.
G.5.2.1 Scanner rear cover
3. Remove the upper rear cover.
G DISASSEMBLY/REASSEMBLY > 5. bizhub C368/C308/C258
10. Remove the screw [1], and remove the toner supply motor/K [2].
4. Remove the screw [1]. Disconnect the connector [2], and remove the toner
supply motor/C [3].
NOTE
▪ When removing the toner supply motor/C [3], make sure to turn it in
the direction shown in the illustration.
4. Remove the screw [1]. Disconnect the connector [2], and remove the toner
supply motor/M [3].
NOTE
▪ When removing the toner supply motor/M [3], make sure to turn it in
the direction shown in the illustration.
G-56