INSTRUCCIONES DE INSTALACIÓN INSTRUCTIONS D’INSTALLATION INSTALLATIONSANLEITUNG Image Transfer Belt for use in ISTRUZIONI PER L’INSTALLAZIONE Konica Minolta bizhub C220/C280/C360 INSTRUÇÕES DE INSTALAÇÃO and C224/258/284/308/364/368/454/554 applications Remove the cleaning blade assembly by first removing the two screws. Remove two bracket screws and rotate the ground wire up.
Page 2
Remove the tension roller springs Position the assembly with the handle down on each side of the assembly. (as shown in the picture). Remove the tension roller by sliding it up and out. Remove the old belt from the frame. Locate the lot code written on the inside of the new belt.