Konica Minolta bizhub C658 Service Manual page 927

bizhub C658/C558/C458/C368/C308/C258
5.16.14 Stamp
(1) Use
• To set the mounting status of the optional stamp unit SP-501.
• To use when setting up the stamp unit SP-501.
(2) Default setting
• Unset
(3) Setting item
• Set
• Unset
5.16.15 Network Fax Settings
(1) Use
• To set whether or not to use network fax function.
• To use network fax function (IP address fax, internet fax).
• Selection will be available when each network fax function is set to "ON" in [Administrator Settings] -> [Network Settings] -> [Network Fax
Settings] -> [Network Fax Function Settings].
(2) Default setting
• OFF
(3) Setting item
IP Address Fax
• ON
• OFF
Internet Fax
• ON
• OFF
5.16.16 RX File Change Page Name
(1) Use
• To set whether to change the document file name to forward TX or take out a file from the Memory RX Box.
(2) Default setting
• Do Not Change
(3) Setting item
• Change
• Do Not Change
5.16.17 ADF Settings
(1) Use
• To configure ADF installation settings.
NOTE
▪ It is not used on bizhub C658/C558/C458.
(2) Default setting
• Unset
(3) Setting item
• Unset
• Single-Sided Scan Tx
• Dual Scan Document Feeder
5.16.18 Image Stabilization Setting
(1) Use
• To change the type and timing of image stabilization.
• To provide the desirable image stabilization control that depends on customer's machine usage pattern, i.e. the ratio of color to black
print.
Standard
Color Priority
This mode is suitable for low-volume users and reduces
the number of times image stabilization is carried out
when the main power switch is turned ON.
This mode is suitable for high-volume and high ratio of
color print users.
I ADJUSTMENT/SETTING > 5. SERVICE MODE
If the change of absolute humidity is detected during
warm-up, normal stabilization is performed during
warm-up.
Color stabilization sequence is performed
unconditionally when the main power switch is turned
ON.
I-157