Konica Minolta bizhub C658 Service Manual page 533

bizhub C658/C558/C458/C368/C308/C258
[3] [1]
[1]
7. To reinstall, reverse the order of removal.
8.5 Disassembly/reassembly procedure (PC-110/PC-210)
8.5.1 Right door (PC-110/PC-210)
1. Open the right door.
[1]
[2]
3. To reinstall, reverse the order of removal.
8.5.2 Rear right cover (PC-110/PC-210)
[1]
2. To reinstall, reverse the order of removal.
[2]
[2]
5. Remove the screw [1], and remove the guide plate [2].
NOTE
▪ When mounting it, set the ground terminal through the hole [3]
shown on the illustration.
6. Remove the used stamp, and install the new stamp of replacement [1].
NOTE
▪ Align the round pin of the stamp with the slit in the stamp unit side.
2. Remove the screw [1], and remove the right door [2].
1. Remove two screws [1], and remove the rear right cover [2].
G-233
G DISASSEMBLY/REASSEMBLY > 8. Option