Table of Contents
Advertisement
Command Set Organization
The command set for the 16533/34A is divided into module level commands
and subsystem commands. Module level commands are listed in Chapter 2
and each of the subsystem commands are covered in their individual chapters
starting with Chapter 3.
Each of these chapters contain a description of the subsystem, syntax
diagrams and the commands in alphabetical order. The commands are
shown in longform and shortform using upper and lowercase letters. For
example, TRIGger indicates that the longform of the command is TRIGGER
and the shortform is TRIG. Each of the commands contains a description of
the command and its arguments, the command syntax, and a programming
example.
Figure 1-1 is the command tree for the 16533/34A oscilloscope module.
Figure 1-1
16533/34A Command Tree
Programming the 16533/34A Oscilloscope Module
Command Set Organization
1–9
Advertisement
Table of Contents
