Command Reference For Signaling Test - Agilent Technologies N9360A Programming Manual

5
Programming Command Reference

Command Reference for Signaling Test

5-56
BER Test
TESTs:MANual:BER:STATe ON|OFF|1|0
TESTs:MANual:BER:STATe?
This command sets whether or not to execute the BER test. The
parameter is (1) or
ON
This query command returns the setting of the BER test with
integer value of or
1 0
as that of the command parameter.
CPICH RSCP
TESTs:MANual:CPichRScp:STATe ON|OFF|1|0
TESTs:MANual:CPichRScp:STATe?
This command sets whether or not to execute the CPICH RSCP
measurement. The parameter is
is set to .
ON
If this is set to in Connection status, the softkey for CPICH
ON
RSCP measurement trigger is activated.
(The TESTs:MANual:CPichRScp:MEASure command is
valid.)
Also, if this is set to
ON
measured once automatically.
This query command returns the setting of the CPICH RSCP test
with integer value of
same as that of the command parameter.
Location Update
TESTs:MANual:LOCupdate
This command executes a Location update procedure to the
mobile phone from the Tester.
N9360A Multi UE Tester W-CDMA Programming Manual
(0). At preset, this is set to
OFF
. The meaning of the return value is same
(1) or
ON OFF
in Stand-by status, CPICH RSCP is
or . The meaning of the return value is
1 0
.
ON
(0). At preset, this