18 - QR019CHB CVT
Turbine Speed Sensor
Removal
1. Turn off all the electrical devices and ignition switch.
2. Disconnect the negative battery cable.
3. Remove the battery, battery tray and tray bracket
4. Remove the air filter
5. Disconnect the turbine speed sensor wire harness
connector (arrow).
6. Remove the fixing bolt (2) of the turbine speed sensor
and take out the turbine speed sensor (1).
(Tightening torque: 10 - 12 N·m)
Installation
Installation is in the reverse order of removal.
CAUTION
Keep clean of sensor and contact surface between sensor and transmission, and avoid dust or impurity
entering the transmission.
During installation, apply automatic transmission fluid on the O ring of the sensor.
18
116
18–
(See page
10-17).
(See page
16-7).
1
Chery Automobile Co., Ltd.
2
RT21180390