Chery T21 2014 Service Manual page 506

07 - SQR484F ENGINE MECHANICAL
c. Using a hammer handle (1), push the piston
connecting rod assembly (2) out of the top of cylinder.
35.Remove the connecting rod bearing.
a. Remove the connecting rod bearing (arrow).
HINT:
Arrange the removed parts in the correct order.
07
CAUTION
 Be careful not to scratch the cylinder wall during operation.
 Attach a label with the corresponding number to each piston connecting rod assembly to prevent
incorrect installation.
36.Remove the piston ring.
a. Using a piston
compression rings (2).
CAUTION
 Before removing the piston ring, check the piston ring side clearance. If it is necessary to be reused, be
sure to mark the piston ring position.
b. Remove the oil ring rail and expander by hands.
37.Remove the piston.
Piston pin is semi-floating and cannot be assembled by general process after removal, so it is not
allowable to be removed in service. If there are abnormal noises caused by improper piston pin clearance,
replace the piston connecting rod assembly.
84
07–
ring remover (1), remove
1
2
Chery Automobile Co., Ltd.
2
RT21070960
RT21070970
2
1
RT21070980