Chery T21 2014 Service Manual page 1208

26 - BRAKE
Assembly
HINT:
 Use the same procedures for the right side and left side.
 Procedures listed below are for the left side.
CAUTION
 When assembling brake caliper assembly, always keep your hands clean.
 When assembling brake caliper assembly, always use clean new brake fluid.
 Never use old seal ring for front disc brake piston.
1. Install the front disc brake piston seal ring.
a. Apply a light coat of grease to entire inner and outer
circumferences of new front disc brake piston seal
ring.
b. Install the front disc brake piston seal ring onto the
brake cylinder.
CAUTION
 Securely install front disc brake piston seal ring into the rear ring groove of brake cylinder.
2. Install the front disc brake piston.
a. Apply a light coat of grease to the inner and outer
circumferences, and entire periphery of outer flange
top/bottom surfaces of new brake cylinder dust boot
as shown in the illustration.
b. Apply a light coat of grease to the entire outer
circumference (part contacting with the brake cylinder
dust boot and front disc brake cylinder) of front disc
brake piston.
c. Install the brake cylinder dust boot onto the front disc brake piston.
3. Install the brake cylinder dust boot.
a. Install the front disc brake piston to the front disc brake cylinder.
CAUTION
26
 DO NOT install piston forcibly to brake cylinder.
34
26–
Grease
Grease
Chery Automobile Co., Ltd.
RT21260460
RT21260470