Chery T21 2014 Service Manual page 1083

Rear Wheel Toe-in
Incorrect rear wheel toe-in will cause wheel pull and abnormal tire wear. Check and adjust rear wheel toe-in
as necessary.
If rear wheel toe-in is not within the tolerance due to other reasons, adjust the eccentric adjusting sleeve and
eccentric adjusting nut of coupling bolt between rear trailing arm assembly and fixing bracket assembly to the
specified valve.
If rear wheel toe-in is not as specified, check if rear suspension and wheels are damaged or deformed.
Replace the damaged or deformed components as necessary.
Item
Rear Wheel Toe-in
Adjustment
1. Make adjusting preparation for wheel alignment according to the requirement of tester.
2. Loosen the coupling bolts (arrow) between rear trailing
arm assembly and fixing bracket assembly, be careful
that eccentric adjusting sleeve and eccentric adjusting
nut do not detach from groove.
3. Rotate the eccentric adjusting sleeve and eccentric adjusting nut to adjust rear wheel toe-in to the
specified valve.
4. Tighten the coupling bolt between rear trailing arm assembly and fixing bracket assembly to the specified
torque (adjusting method of left and right wheels is the same).
(Tightening torque: 150 ± 10 N·m)
Chery Automobile Co., Ltd.
23 - SUSPENSION
Specified Value
10' ± 10'
RT21230470
23
53
23–