Chery T21 2014 Service Manual page 1387

Check wire harness and connector (HVAC control panel assembly - inner/outer circulation
3
damper motor)
a. Turn ignition switch to LOCK.
b. Disconnect the negative battery cable.
c. Disconnect the HVAC control panel assembly connector
K-012.
d. Disconnect the inner/outer circulation damper motor
connector K-006.
e. Using a digital multimeter, check for continuity between
terminals of connector K-012 and connector K-006 to
check if there is an open in inner/outer circulation damper
motor according to the table below.
Standard Condition
Multimeter
Condition
Connection
K-012 (5) - K-006
(1)
K-012 (1) - K-006
(2)
K-012 (7) - K-006
(3)
K-012 (6) - K-006
(4)
K-012 (8) - K-006
(6)
Repair or replace A/C wire harness and
NG
connector
Chery Automobile Co., Ltd.
Specified
Condition
Always Continuity
Always Continuity
Always Continuity
Always Continuity
Always Continuity
31 - AIR CONDITIONING
+ -
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20
21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40
K-012
4 1
5 2
6 3
K-006
31
RT21311220
OK
61
31–