Chery T21 2014 Service Manual page 1204

26 - BRAKE
Disassembly
HINT:
 Use the same procedures for the right side and left side.
 Procedures listed below are for the left side.
WARNING
 Never use high pressure when removing piston from the bore of brake caliper. Otherwise this may cause
personal injuries.
 If it is needed to remove piston with compressed air. DO NOT face the piston to yourself or place your
hands around the brake caliper and piston.
1. Remove the bleeder plug (w/ bleeder plug cap).
a. Remove the bleeder plug (w/ bleeder plug cap)
(arrow) from brake caliper assembly.
2. Remove the brake cylinder assembly.
a. Remove 2 locating bolts (arrow) between brake
caliper fixing bracket and brake cylinder assembly.
b. Detach the brake cylinder assembly and brake caliper fixing bracket.
3. Remove the front brake caliper locating bolt guide pin (w/ dust boot).
a. Remove 2 brake caliper locating bolt guide pins (w/
dust boot) (arrow) from brake caliper fixing bracket.
26
30
26–
Chery Automobile Co., Ltd.
RT21260360
RT21260370
RT21260380