Chery T21 2014 Service Manual page 1296

29 - HYDRAULIC ASSIST STEERING
a. Remove the locking nut (arrow) between left steering
tie rod assembly ball pin and front left steering knuckle
assembly.
(Tightening torque: 35 ± 3 N·m)
29
b. Install the ball pin separator (1), and tighten the ball
pin separator bolt with a wrench (2) to separate the
steering tie rod ball pin and steering knuckle
assembly.
8. Remove the steering gear with tie rod assembly.
a. Remove the high pressure fluid pipe clamping bolt (1)
and fluid return pipe clamping bolt (2) from the
steering gear
connectionsbetween fluid return pipe, high pressure
fluid pipe and steering gear assembly.
(Tightening torque for fluid return pipe clamping bolt:
30 ± 3 N·m)
(Tightening torque for high pressure fluid pipe
clamping bolt: 30 ± 3 N·m)
b. Remove the high pressure fluid pipe bracket bolt 1
and fluid return pipe bracket bolt 2 from the steering
gear assembly.
24
29–
assembly, and disconnect the
Chery Automobile Co., Ltd.
RT21220120
2
1
RT21220130
2
1
RT21290064
2
1
RT21290065