Chery T21 2014 Service Manual page 1074

23 - SUSPENSION
c. Remove 2 coupling bolts (arrow) between left side of
rear stabilizer bar assembly and body. Use the same
removal procedure for the right side.
(Tightening torque: 25 ± 3 N·m)
d. Remove the rear stabilizer bar fixing clamp (1), rear
stabilizer bar rubber support (2) and rear stabilizer bar
assembly (3).
Inspection
1. Check rear stabilizer bar assembly.
a. Check rear stabilizer bar assembly fixing clamps for wear, cracks, deformation or damage. Replace as
necessary.
b. Check rear stabilizer bar assembly rubber supports for dirt, wear, cracks, deformation or damage.
Replace as necessary.
Installation
Installation is in the reverse order of removal.
CAUTION
 Always tighten coupling bolts and nuts to the specified torque.
23
44
23–
3
2
1
Chery Automobile Co., Ltd.
RT21230500
RT21230510