Chery T21 2014 Service Manual page 1264

28 - STEERING COLUMN
Steering Column with Intermediate Shaft Assembly (without EPS)
Removal
1. Set steering wheel to straight-ahead position.
2. Turn off all the electrical equipment and ignition switch.
28
3. Disconnect the negative battery cable.
4. Remove the driver airbag
5. Remove the steering wheel assembly
6. Remove the combination switch cover
7. Remove the spiral cable
8. Remove the combination switch assembly.
a. Disconnect the light combination switch connector (1)
and wiper and washer combination switch connector
(2).
b. Loosen the combination switch clamp and pull the
combination switch outward, then disconnect the
combination switch from the steering column to
remove the combination switch.
9. Remove the steering column with intermediate shaft assembly.
a. Disconnect the ignition starting switch connector (1),
key switch connector (2) and connector (3) of ignition
switch illumination light and anti-theft coil.
16
28–
(See page 32-65).
(See page 28-10).
(See page 28-13).
(See page 32-67).
100 120
80 140
60 160
40 180
20 200
km/h
0 220
E F
1
3
2
100 120
80 140
60 160
180
40
20 200
km/h
0 220
E F
3
2
Chery Automobile Co., Ltd.
2
RT21280120
RT21280130
2
3
1
RT21280140