Assembly
Assembly is in the reverse order of disassembly.
CAUTION
Check if shock pad is deteriorated or damaged. Replace if necessary.
Installation
Installation is in the reverse order of removal.
CAUTION
ABS control module assembly consists of hydraulic control module and electronic control module. As a
unit, they cannot be repaired or replaced individually.
When installing fixing bolts and screws, be sure to tighten them to specified torque.
Perform ABS bleeding procedures for brake system after completing installation
Using X-431 3G diagnostic tester, enter brake control system, record and clear the trouble code, then
drive vehicle to perform a road test, confirming that the ABS system operates normally and brake pedal
feel is good.
Chery Automobile Co., Ltd.
25 - BRAKE CONTROL SYSTEM
(See page
25-70).
25–
25
73