6. Install the input shaft rear washer.
a. Apply an appropriate amount of transmission oil to the
input shaft rear washer, and put the input shaft rear
washer (1) onto the input shaft rear bearing.
CAUTION
Evenly put the input shaft rear washer onto the input shaft rear bearing without the washer edge out of
the input shaft rear bearing.
7. Install the magnet.
a. Install the magnet (1) to the clutch case in the
direction of arrow.
8. Install the transmission case.
a. Install the transmission case to the clutch case.
CAUTION
Remove the seal gum residues from the case.
Make sure the joint surface of case is free of oil, and uniformly apply seal gum.
Chery Automobile Co., Ltd.
17 - QR525MHE TRANSMISSION
1
RT21170290
1
RT21170360
RT21170370
17–
17
29