Chery T21 2014 Service Manual page 948

18 - QR019CHB CVT
Primary Shaft Speed Sensor
Removal
1. Turn off all the electrical devices and ignition switch.
2. Disconnect the negative battery cable.
3. Remove the battery, battery tray and tray bracket
4. Remove the air filter
5. Disconnect the primary shaft speed sensor wire harness connector.
6. Remove the fixing bolt (1) of the primary shaft speed
sensor and take out the primary shaft speed sensor (2). 
(Tightening torque: 10 - 12 N·m)
Installation
Installation is in the reverse order of removal.
CAUTION
 Keep clean of sensor and contact surface between sensor and transmission, and avoid dust or impurity
entering the transmission.
 During installation, apply automatic transmission fluid on the O ring of the sensor.
18
114
18–
(See page 10-17).
(See page 16-7).
Chery Automobile Co., Ltd.
2
1
RT21180370