Chery T21 2014 Service Manual page 991

ON-VEHICLE SERVICE
Drive Shaft Assembly
Removal
HINT:
 Use the same procedures for the right side and left side.
 Procedures listed below are for the left side.
1. Turn off all the electrical equipment and ignition switch.
2. Disconnect the negative battery cable.
3. Remove the front wheel
4. Drain the transmission oil
5. Remove the fixing nut from front axle left drive shaft.
a. Using a nut chisel and a hammer, loosen the staked
part of nut.
CAUTION
 Loosen the staked part of nut completely, otherwise it will damage the thread of drive shaft.
b. While applying brake, remove the drive shaft fixing
nut.
(Tightening torque: 300 ± 20 N·m)
Chery Automobile Co., Ltd.
(See page 24-9).
(See page 17-14).
20 - DRIVE SHAFT
RT21220050
20
RT21220060
5
20–