Chery T21 2014 Service Manual page 1240

27 - PARKING BRAKE
e. Loosen the coupling bolt (arrow) between parking
brake rear cable assembly fixing bracket and rear
trailing arm assembly, and disengage the cable fixing
bracket.
(Tightening torque: 23 ± 2 N·m)
f. Remove the fixing clamp (arrow) and disengage the
parking brake rear cable assembly from the fixing
bracket.
g. Disengage the parking brake rear cable assembly end
(arrow) from the parking brake pulling arm.
h. Remove the parking brake rear cable assembly.
Installation
Installation is in the reverse order of removal.
CAUTION
 Always tighten coupling bolts and nuts to the specified torque.
 During installation, make sure to align the positioning part of parking brake rear cable assembly fixing
bracket and the positioning hole on body.
HINT:
Parking brake should be adjusted after replacing brake shoe or parking brake cable assembly. Check if
parking brake functions properly after adjustment is completed.
 Fully pull up parking brake control mechanism.
 Release parking brake control mechanism and check if rear wheels rotate freely.
 If wheels are difficult to rotate freely, repeat adjustment procedures.
27
 After driving for a period of time, parking brake control mechanism stroke should be readjusted because of
wear of rear brake shoe linings.
14
27–
Chery Automobile Co., Ltd.
RT21230450
RT21270100
RT21270110