Chery T21 2014 Service Manual page 590

10 - SQR484F INTAKE SYSTEM
Inspection
1. Clean and check the fitting surface between intake manifold assembly and cylinder head.
2. Measure the surface warpage of cylinder head intake
side with precision ruler and feeler gauge diagonally as
shown in the illustration. If surface warpage is more than
0.04 mm, replace the cylinder head.
Installation
Installation is in the reverse order of removal.
CAUTION
 Clean the inner wall of intake manifold assembly and the fitting surface.
 Replace intake manifold gasket.
10
26
10–
Chery Automobile Co., Ltd.
RT21100290