Chery T21 2014 Service Manual page 1218

26 - BRAKE
5. Remove the brake lining support gasket.
a. Remove 2 brake lining support gaskets (arrow) from
brake caliper fixing bracket.
6. Remove the brake cylinder dust boot.
a. Using a flat tip screwdriver wrapped with protective
tape, pry out the dust boot carefully.
CAUTION
 Be careful not to damage brake piston and brake cylinder.
7. Remove the rear disc brake piston.
a. Place a wooden board (1) between rear disc brake
piston and rear disc brake cylinder.
b. Use compressed air (2) to carefully press out the
piston from rear disc brake cylinder through the
attachment hole.
CAUTION
 Be careful not to splash brake fluid.
 DO NOT hold piston by hands to prevent injury.
 DO NOT remove or install brake piston casually, and always perform these operations by professional.
26
c. Clean the piston bore with alcohol or proper solution. Then wipe it with a piece of lint.
44
26–
1
Chery Automobile Co., Ltd.
RT21260610
RT21260620
2
RT21260630