Chery T21 2014 Service Manual page 1290

29 - HYDRAULIC ASSIST STEERING
Disassembly
1. Separate the power steering pump assembly and steering pump bracket.
a. Remove the coupling bolt (arrow) between power
steering pump assembly and pulley side of steering
pump bracket.
(Tightening torque: 25 ± 3 N·m)
29
b. Remove 2 coupling bolts (arrow) between power
steering pump assembly and the other side of
steering pump bracket.
(Tightening torque: 25 ± 3 N·m)
Inspection
1. Check power steering pump assembly for blockage or damage, and power steering pump bearing for
looseness and abnormal noise. Replace the power steering pump assembly if necessary.
2. Check if power steering pump pulley is normal. Replace the power steering pump assembly if necessary.
3. Check if steering pump bracket is normal. Replace the steering pump bracket if necessary.
Assembly
Assembly is in the reverse order of disassembly.
CAUTION
 Tighten the bolts to the specified torque.
 DO NOT tap or hit power steering pump assembly.
Installation
Installation is in the reverse order of removal.
CAUTION
 Tighten the fixing bolts to the specified torque.
 DO NOT tap or hit power steering pump assembly.
18
29–
Chery Automobile Co., Ltd.
RT21290140
RT21290150