Chery T21 2014 Service Manual page 1053

c. Remove the coupling bolt (arrow) between front left
control arm ball pin assembly and front left control arm
assembly.
(Tightening torque: 150 ± 10 N·m)
d. Remove the front left control arm ball pin assembly.
Inspection
1. Check control arm ball pin assembly.
a. Check control arm assembly ball pin boot for wear, cracks, deformation, damage or grease leakage.
Replace as necessary.
b. Check if control arm assembly ball pin rotates smoothly. Replace as necessary.
Installation
Installation is in the reverse order of removal.
CAUTION
 Always tighten coupling bolts and nuts to the specified torque.
 Make sure that ball pin rotates smoothly and is not stuck after installation.
 Check wheel alignment after installation is completed. Adjust the wheel alignment to standard range as
necessary.
Chery Automobile Co., Ltd.
23 - SUSPENSION
RT21230230
23
23
23–