Chery T21 2014 Service Manual page 641

Radiator Assembly
Removal
WARNING
 Always make sure engine is cold before operating cooling system.
 Never open expansion tank cap or remove drain cock plug when engine is operating or cooling system
overheats. The engine coolant and steam with high-pressure and overheat may flow out and cause
serious personal injury.
 If your body contacts coolant accidentally, clean it with water immediately. If it is serious, please go to
hospital.
CAUTION
 Be sure to wear necessary safety equipment to prevent accidents when repairing.
 Try to prevent body paint surface from being scratched during removal and installation.
1. Turn off all the electrical equipment and ignition switch.
2. Disconnect the negative battery cable.
3. Remove the engine trim cover assembly
4. Remove the radiator grille assembly
5. Remove the water tank upper crossmember trim board
6. Remove the engine hood lock assembly
7. Move away the hood lock cable from tank upper crossmember assembly.
8. Remove the tank upper crossmember assembly
9. Drain the coolant (See page
10.Remove the cooling fan assembly
11. Remove the radiator assembly.
a. Loosen the elastic clamp (arrow) and disconnect the
connection between engine outlet hose and radiator
assembly.
Chery Automobile Co., Ltd.
(See page 10-10).
(See page 48-8).
(See page 37-39).
(See page
12-13).
(See page 12-26).
12 - SQR484F COOLING SYSTEM
(See page 48-8).
12-16).
12
RT21120270
29
12–