Chery T21 2014 Service Manual page 602

11 - SQR484F EXHAUST SYSTEM
Precatalytic Converter Assembly
Removal
WARNING
 The temperature of exhaust system is very high when engine is running. Before removal, make sure that
engine has stopped running, otherwise, there is a risk of scald injury.
CAUTION
 Be sure to wear necessary safety equipment to prevent accidents when repairing.
 Try to prevent body paint surface from being scratched during removal and installation.
1. Turn off all the electrical equipment and ignition switch.
2. Disconnect the negative battery cable.
3. Remove the engine trim cover assembly
4. Remove the precatalytic converter assembly.
a. Take off and disconnect the upstream oxygen sensor
11
connector (arrow) from the bracket.
b. Remove 4 fixing bolts (arrow) from the exhaust
manifold heat insulator, and remove the exhaust
manifold heat insulator.
(Tightening torque: 23 ± 2 N·m)
10
11–
(See page 10-10).
Chery Automobile Co., Ltd.
RT21090110
RT21110020