Chery T21 2014 Service Manual page 997

Outer Ball Cage
Disassembly
HINT:
Use the same disassembly and assembly procedures for left and right drive shaft assemblies.
1. Remove the drive shaft assembly
2. Remove the outer ball cage dust boot outer clamp.
a. Using a screwdriver, pry out the striker of outer ball
cage dust boot outer clamp and remove the outer ball
cage dust boot outer clamp.
3. Remove the outer ball cage dust boot inner clamp.
a. Using a screwdriver, pry out the striker of outer ball
cage dust boot inner clamp and remove the outer ball
cage dust boot inner clamp.
4. Remove the outer ball cage.
a. Slide the outer dust boot (1) carefully into the inner
ball cage side in the direction of arrow.
b. Put a matchmark (1) on the area with the same height
as drive shaft assembly (2) and edge of outer ball
cage (3) for correct installation.
Chery Automobile Co., Ltd.
(See page 20-5).
20 - DRIVE SHAFT
RT21200090
RT21200100
1
RT21200110
2
1
3
RT21200120
11
20–
20