DTC
C1901
Battery Under Voltage Error
C1902
Battery Over Voltage Error
CAUTION
When performing the circuit diagnosis and test, always refer to the circuit diagram for the specific circuit
and the component information.
Diagnosis Procedure
1
Check battery
a. Check if battery voltage is normal.
Recharge or replace battery
NG
2
Check battery terminals
a. Check if battery terminals are loose or corroded.
Tighten or replace battery terminals
NG
3
Check EPS ground point
a. Turn ignition switch to LOCK.
b. Check EPS ground point E-081.
Repair or replace ground wire harness or
NG
ground point
Chery Automobile Co., Ltd.
DTC Definition
30 - ELECTRONIC POWER STEERING
Possible causes
Fuse
Wire harness or connector
Battery
Battery terminal
EPS booster assembly
30
OK
OK
OK
13
30–