Chery T21 2014 Service Manual page 1190

26 - BRAKE
Brake Master Cylinder Assembly
Removal
CAUTION
 Remove the vacuum remained in vacuum booster before removing brake master cylinder assembly to
avoid damaging brake master cylinder assembly and prevent booster from sucking in any pollutant.
 When engine is not running, remove vacuum by depressing brake pedal repeatedly until the brake pedal
can be depressed firmly.
 When removing brake line, sealing measures should be taken to prevent foreign matter from entering.
1. Drain the brake fluid
CAUTION
 Wash off brake fluid immediately if it comes in contact with any paint surface.
ENVIRONMENTAL PROTECTION
 Drained brake fluid should be well kept in a container. Never discard it at will.
2. Remove the air filter assembly
3. Remove the brake master cylinder assembly.
a. Loosen the brake fluid tube fixing clamp (arrow) and
disengage the brake fluid tube from brake fluid
reservoir assembly.
b. Loosen the clutch hose fixing clamp (arrow) and
disengage the clutch hose from brake fluid reservoir
assembly (for only MT model).
26
16
26–
(See page 26-13).
(See page 10-17).
Chery Automobile Co., Ltd.
RT21260100
RT21260110