30 - ELECTRONIC POWER STEERING
DTC
C1910
IGN Voltage Error
CAUTION
When performing the circuit diagnosis and test, always refer to the circuit diagram for the specific circuit
30
and the component information.
Diagnosis Procedure
1
Check EPS ground point
a. Turn ignition switch to LOCK.
b. Check EPS ground point E-081.
Repair or replace ground wire harness or
NG
ground point
2
Check EPS connector
a. Disconnect two EPS connectors.
b. Check connectors.
Repair or replace EPS connector
NG
18
30–
DTC Definition
Possible causes
Fuse
Wire harness or connector
EPS booster assembly
Chery Automobile Co., Ltd.
OK
OK