Chery T21 2014 Service Manual page 1064

23 - SUSPENSION
Rear Coil Spring
Removal
CAUTION
 Be sure to wear necessary safety equipment to prevent accidents.
 Make sure that safety lock of lifter has been locked when removing and installing chassis parts.
 It is not permitted to weld or modify suspension bearing parts.
 When removing and installing chassis parts, replace self-locking nuts and rusted nuts for safety.
HINT:
 Use the same procedures for the right side and left side.
 Procedures listed below are for the left side.
1. Remove the rear left wheel
2. Remove the rear left coil spring.
a. Support the rear left suspension with a transmission carrier securely.
b. Remove the coupling nut (arrow) between lower part
of rear left stabilizer link assembly and rear
suspension lower left swing arm assembly.
(Tightening torque: 45 ± 5 N·m)
c. Remove 2 coupling bolts (arrow) between rear left
shock absorber assembly fixing bracket and rear left
trailing arm assembly.
(Tightening torque: 80 ± 8 N·m)
d. Remove the coupling bolt and nut (arrow) between
lower part of rear suspension lower left swing arm
23 assembly and rear left trailing arm assembly.
(Tightening torque: 120 ± 10 N·m)
34
23–
(See page 24-9).
Chery Automobile Co., Ltd.
RT21230370
RT21230380
RT21230390