Chery T21 2014 Service Manual page 998

20 - DRIVE SHAFT
c. Wrap the drive shaft assembly with a piece of cloth
and put it onto a vise. Secure the vise to prevent the
drive shaft assembly from shaking. Tap the outer ball
cage (1) forcibly with a hammer, and remove the outer
ball cage (1).
5. Remove the retaining ring (1).
6. Remove the outer ball cage dust boot.
a. Wrap tape on the spline of drive shaft, and remove the
dust boot.
b. Remove the tape.
Inspection
1. Check if spline of drive shaft is in good condition. If it is deformed or damaged, replace it.
20
2. Check if dust boot is in good condition. If it is scratched or broken, replace it.
Assembly
CAUTION
 Refill grease during assembly.
 Install it with new clamps.
 Operate carefully to prevent the dust boot from being damaged.
Assembly is in the reverse order of disassembly.
12
20–
1
1
Chery Automobile Co., Ltd.
RT21200130
RT21200140
RT21200150