Chery T21 2014 Service Manual page 456

07 - SQR484F ENGINE MECHANICAL
b. Using a suitable inner hexagon wrench, adjust the
tensioner adjuster in the adjustment direction (1) of
timing belt tensioner, and also tighten the fixing bolt
with a wrench until the timing belt tensioner needle (2)
and timing notch mark (3) of base are aligned.
HINT:
After marks of tensioner are aligned, return to an
angle after rotating by 5° - 10°, then align the marks
again.
5. Tighten the timing belt tensioner fixing bolt (arrow).
(Tightening torque: 20 + 5 N·m)
07
6. Tighten the intake camshaft phaser assembly (1) fixing
bolt.
(Tightening torque: 120 ± 5 N·m)
7. Tighten the exhaust camshaft phaser assembly (1) fixing
bolt.
(Tightening torque: 120 ± 5 N·m)
8. Remove the camshaft locking special tool.
9. Remove the crankshaft timing tool, and install the plug.
(Tightening torque: 40 + 5 N·m)
34
07–
1
1
1
Chery Automobile Co., Ltd.
2
3
RT21070200
RT21070210
RT21070220
RT21070221