Chery T21 2014 Service Manual page 750

15 - SQR484F STARTING SYSTEM
b. Perform hold-in test.
 Keep the starter clutch pinion extending and
connections of battery mentioned above, and
disconnect the negative battery cable from
terminal C.
 Check that the starter clutch pinion remains
extended.
If the starter clutch pinion moves inward, replace the starter assembly.
c. Check if starter clutch pinion returns.
 Disconnect negative battery lead from the starter
body. Check that the starter clutch pinion returns.
If the starter clutch pinion does not return, replace the starter assembly.
d. Check if starter rotates smoothly.
 Connect the field coil lead to terminal C, and
tighten it with a nut.
15
 As shown in the illustration, connect battery to the
starter. Check that the starter rotates smoothly and
steadily when the starter clutch pinion is moving
outward.
CAUTION
 The lead to be connected should avoid the pinion side to prevent the lead from getting caught as the
pinion rotates.
If result is not as specified, replace the starter assembly.
Installation
Installation is in the reverse order of removal.
66
15–
Terminal 50
Terminal C
-
+
Terminal 50
Terminal C
-
+
Terminal 30
-
+
Chery Automobile Co., Ltd.
Body
RT21150110
Body
RT21150120
Terminal 50
Body
RT21150130