Chery T21 2014 Service Manual page 982

19 - CLUTCH
Clutch Unit
Removal
1. Remove the transmission assembly
2. Remove the clutch release bearing (1).
3. Remove the release fork (2) from clutch cover.
4. Remove the release fork ball seat (1).
5. Remove the release fork dust boot (2).
6. Remove the clutch pressure plate bolts.
7. Remove the clutch pressure plate and clutch driven disc.
19
Inspection
1. Check clutch driven disc.
a. Visually check clutch driven disc for dirt or glazing. Clean or replace clutch driven disc as necessary.
2. Use a vernier caliper to measure the thickness of clutch
driven disc.
Standard thickness: 7.6 ± 0.2 mm
Minimum rivet depth: 1.2 mm
If result is not as specified, replace clutch driven disc.
14
19–
(See page 17-21).
1
2
1
1
3
6
5
4
2
Chery Automobile Co., Ltd.
RT21190170
2
RT21190180
RT21190190
RT21190200