d. Disengage the fixing clamp (arrow) between A/C low
pressure line and coolant circulation line.
e. Remove the fixing bolt (arrow) between A/C low
pressure
line
and
disengage the A/C low pressure line from the
compressor assembly.
(Tightening torque: 25 ± 2.5 N·m)
f. Remove the A/C low pressure line (compressor to evaporator).
Installation
Installation is in the reverse order of removal.
CAUTION
Tighten fixing bolts and fixing nuts to specified torque.
It is necessary to replace the refrigerant line O-ring when installing the refrigerant line. Failure to do so
may result in refrigerant leaks.
Lubricate the new rubber O-ring with clean refrigerant oil and install it to the refrigerant line joint.
Only use the specified O-ring, as it is made of special materials for R134a system.
Only use recommended refrigerant oil which is applicable to the A/C compressor assembly on vehicle.
Perform recharging for the A/C system and check refrigerant for leakage.
Chery Automobile Co., Ltd.
compressor
assembly,
and
31 - AIR CONDITIONING
RT21310770
31
RT21310780
95
31–