23 - SUSPENSION
Rear Suspension Lower Swing Arm Assembly
Removal
CAUTION
Be sure to wear necessary safety equipment to prevent accidents.
Make sure that safety lock of lifter has been locked when removing and installing chassis parts.
It is not permitted to weld or modify suspension bearing parts.
When removing and installing chassis parts, replace self-locking nuts and the rusted nuts for safety.
HINT:
Use the same procedures for the right side and left side.
Procedures listed below are for the left side.
1. Remove the rear left wheel
2. Remove the rear suspension lower left swing arm assembly.
a. Remove the coupling nut (arrow) between lower part
of rear left stabilizer link assembly and rear
suspension lower left swing arm assembly.
(Tightening torque: 45 ± 5 N·m)
b. Remove 2 coupling bolts (arrow) between rear left
shock absorber assembly fixing bracket and rear left
trailing arm assembly.
(Tightening torque: 80 ± 8 N·m)
c. Remove the coupling bolt and nut (arrow) between
lower part of rear suspension lower left swing arm
assembly and rear left trailing arm assembly.
(Tightening torque: 120 ± 10 N·m)
23
38
23–
(See page
24-9).
Chery Automobile Co., Ltd.
RT21230370
RT21230380
RT21230390