Chery T21 2014 Service Manual page 452

07 - SQR484F ENGINE MECHANICAL
10.Remove the timing belt.
a. Remove the cylinder head cover
b. Turn the camshaft, install the camshaft timing tool (1),
tighten the fixing bolts (arrow), and lock the exhaust
camshaft (2) and intake camshaft (3).
CAUTION
 After installing camshaft locking special tool, the crankshaft will be in the timing position, the camshaft
07
timing tool can be installed at this time.
c. Remove the plug (arrow) for installing crankshaft
timing tool from the bottom of engine block. 
(Tightening torque: 40 + 5 N·m)
d. Carefully screw in the crankshaft timing tool (arrow)
until the crankshaft is stuck completely.
CAUTION
 This operation needs patience, and exercise extreme care not to damage the crankshaft.
 When crankshaft is stuck completely, pistons in 4 cylinders of engine are at the same level.
30
07–
(See page 07-46).
2
481H EX
481H IN
3
Chery Automobile Co., Ltd.
1
RT21070110
RT21070120
RT21070130