Chery T21 2014 Service Manual page 955

Valve Body Case
Removal
1. Turn off all the electrical devices and ignition switch.
2. Disconnect the negative battery cable.
3. Raise the vehicle with a lifter.
4. Drain the transmission fluid
5. Remove the valve body case fixing bolts and remove the
valve body case (1). 
(Tightening torque: 10 - 12 N·m)
HINT:
When removing the valve body, do not damage the joint
surface of the transmission case.
Installation
Installation is in the reverse order of removal.
CAUTION
 Before installation, clear the sealant residues on the joint surface of the transmission case and clean it
up.
 Keep the installation parts clean and avoid foreign matter entering the transmission.
 During installation, apply sealant on the joint surface of the valve body case and transmission evenly.
 After adding fluid, inspect for fluid leakage.
Chery Automobile Co., Ltd.
(See page 18-110).
18 - QR019CHB CVT
1
RT21180480
18–
18
121